thanos sidecar command runs a component that gets deployed along with a Prometheus instance. This allows sidecar to optionally upload metrics to object storage and allow Queriers to query Prometheus data with common, efficient StoreAPI.
It implements Thanos’ Store API on top of Prometheus’ remote-read API. This allows Queriers to treat Prometheus servers as yet another source of time series data without directly talking to its APIs.
Optionally, the sidecar uploads TSDB blocks to an object storage bucket as Prometheus produces them every 2 hours. This allows Prometheus servers to be run with relatively low retention while their historic data is made durable and queryable via object storage.
NOTE: This still does NOT mean that Prometheus can be fully stateless, because if it crashes and restarts you will lose ~2 hours of metrics, so persistent disk for Prometheus is highly recommended. The closest to stateless you can get is using remote write (which Thanos supports, see Receiver. Remote write has other risks and consequences, and still if crashed you lose in positive case seconds of metrics data, so persistent disk is recommended in all cases.
Optionally Thanos sidecar is able to watch Prometheus rules and configuration, decompress and substitute environment variables if needed and ping Prometheus to reload them. Read more about this in here
Prometheus servers connected to the Thanos cluster via the sidecar are subject to a few limitations and recommendations for safe operations:
external_labelssection of the Prometheus configuration file has unique labels in the overall Thanos system. Those external labels will be used by the sidecar and then Thanos in many places. See external labels docs.
--web.enable-admin-apiflag is enabled to support sidecar to get metadata from Prometheus like external labels.
--web.enable-lifecycleflag is enabled if you want to use sidecar reloading features (
If you choose to use the sidecar to also upload data to object storage:
--storage.tsdb.max-block-durationmust be set to equal values to disable local compaction in order to use Thanos sidecar upload, otherwise leave local compaction on if sidecar just exposes StoreAPI and your retention is normal. The default of
2his recommended. Mentioned parameters set to equal values disable the internal Prometheus compaction, which is needed to avoid the corruption of uploaded data when Thanos compactor does its job, this is critical for data consistency and should not be ignored if you plan to use Thanos compactor. Even though you set mentioned parameters equal, you might observe Prometheus internal metric
prometheus_tsdb_compactions_totalbeing incremented, don’t be confused by that: Prometheus writes initial head block to filesystem via its internal compaction mechanism, but if you have followed recommendations - data won’t be modified by Prometheus before the sidecar uploads it. Thanos sidecar will also check sanity of the flags set to Prometheus on the startup and log errors or warning if they have been configured improperly (#838).
Thanos can watch changes in Prometheus configuration and refresh Prometheus configuration if
You can configure watching for changes in directory via
Thanos sidecar can watch
--reloader.config-file=CONFIG_FILE configuration file, replace environment variables found in there in
$(VARIABLE) format, and produce generated config in
prometheus \ --storage.tsdb.max-block-duration=2h \ --storage.tsdb.min-block-duration=2h \ --web.enable-lifecycle
thanos sidecar \ --tsdb.path "/path/to/prometheus/data/dir" \ --prometheus.url "http://localhost:9090" \ --objstore.config-file "bucket.yml"
The example content of
type: GCS config: bucket: "" service_account: "" prefix: ""
If you want to migrate from a pure Prometheus setup to Thanos and have to keep the historical data, you can use the flag
--shipper.upload-compacted. This will also upload blocks that were compacted by Prometheus. Values greater than 1 in the
compaction.level field of a Prometheus block’s
meta.json file indicate level of compaction.
To use this, the Prometheus compaction needs to be disabled. This can be done by setting the following flags for Prometheus:
usage: thanos sidecar [<flags>] Sidecar for Prometheus server. Flags: --grpc-address="0.0.0.0:10901" Listen ip:port address for gRPC endpoints (StoreAPI). Make sure this address is routable from other components. --grpc-grace-period=2m Time to wait after an interrupt received for GRPC Server. --grpc-server-max-connection-age=60m The grpc server max connection age. This controls how often to re-establish connections and redo TLS handshakes. --grpc-server-tls-cert="" TLS Certificate for gRPC server, leave blank to disable TLS --grpc-server-tls-client-ca="" TLS CA to verify clients against. If no client CA is specified, there is no client verification on server side. (tls.NoClientCert) --grpc-server-tls-key="" TLS Key for the gRPC server, leave blank to disable TLS --hash-func= Specify which hash function to use when calculating the hashes of produced files. If no function has been specified, it does not happen. This permits avoiding downloading some files twice albeit at some performance cost. Possible values are: "", "SHA256". -h, --help Show context-sensitive help (also try --help-long and --help-man). --http-address="0.0.0.0:10902" Listen host:port for HTTP endpoints. --http-grace-period=2m Time to wait after an interrupt received for HTTP Server. --http.config="" [EXPERIMENTAL] Path to the configuration file that can enable TLS or authentication for all HTTP endpoints. --log.format=logfmt Log format to use. Possible options: logfmt or json. --log.level=info Log filtering level. --min-time=0000-01-01T00:00:00Z Start of time range limit to serve. Thanos sidecar will serve only metrics, which happened later than this value. Option can be a constant time in RFC3339 format or time duration relative to current time, such as -1d or 2h45m. Valid duration units are ms, s, m, h, d, w, y. --objstore.config=<content> Alternative to 'objstore.config-file' flag (mutually exclusive). Content of YAML file that contains object store configuration. See format details: https://thanos.io/tip/thanos/storage.md/#configuration --objstore.config-file=<file-path> Path to YAML file that contains object store configuration. See format details: https://thanos.io/tip/thanos/storage.md/#configuration --prometheus.get_config_interval=30s How often to get Prometheus config --prometheus.get_config_timeout=5s Timeout for getting Prometheus config --prometheus.http-client=<content> Alternative to 'prometheus.http-client-file' flag (mutually exclusive). Content of YAML file or string with http client configs. See Format details: https://thanos.io/tip/components/sidecar.md/#configuration. --prometheus.http-client-file=<file-path> Path to YAML file or string with http client configs. See Format details: https://thanos.io/tip/components/sidecar.md/#configuration. --prometheus.ready_timeout=10m Maximum time to wait for the Prometheus instance to start up --prometheus.url=http://localhost:9090 URL at which to reach Prometheus's API. For better performance use local network. --reloader.config-envsubst-file="" Output file for environment variable substituted config file. --reloader.config-file="" Config file watched by the reloader. --reloader.retry-interval=5s Controls how often reloader retries config reload in case of error. --reloader.rule-dir=RELOADER.RULE-DIR ... Rule directories for the reloader to refresh (repeated field). --reloader.watch-interval=3m Controls how often reloader re-reads config and rules. --request.logging-config=<content> Alternative to 'request.logging-config-file' flag (mutually exclusive). Content of YAML file with request logging configuration. See format details: https://thanos.io/tip/thanos/logging.md/#configuration --request.logging-config-file=<file-path> Path to YAML file with request logging configuration. See format details: https://thanos.io/tip/thanos/logging.md/#configuration --shipper.upload-compacted If true shipper will try to upload compacted blocks as well. Useful for migration purposes. Works only if compaction is disabled on Prometheus. Do it once and then disable the flag when done. --store.limits.request-samples=0 The maximum samples allowed for a single Series request, The Series call fails if this limit is exceeded. 0 means no limit. NOTE: For efficiency the limit is internally implemented as 'chunks limit' considering each chunk contains a maximum of 120 samples. --store.limits.request-series=0 The maximum series allowed for a single Series request. The Series call fails if this limit is exceeded. 0 means no limit. --tracing.config=<content> Alternative to 'tracing.config-file' flag (mutually exclusive). Content of YAML file with tracing configuration. See format details: https://thanos.io/tip/thanos/tracing.md/#configuration --tracing.config-file=<file-path> Path to YAML file with tracing configuration. See format details: https://thanos.io/tip/thanos/tracing.md/#configuration --tsdb.path="./data" Data directory of TSDB. --version Show application version.
You can configure the Prometheus HTTP client for Thanos sidecar with YAML, either by passing the YAML content directly to the
--prometheus.http-client flag, or by passing the YAML file path to the
The configuration format is the following:
basic_auth: username: "" password: "" password_file: "" bearer_token: "" bearer_token_file: "" proxy_url: "" tls_config: ca_file: "" cert_file: "" key_file: "" server_name: "" insecure_skip_verify: false transport_config: max_idle_conns: 0 max_idle_conns_per_host: 0 idle_conn_timeout: 0 response_header_timeout: 0 expect_continue_timeout: 0 max_conns_per_host: 0 disable_compression: false tls_handshake_timeout: 0