Table of Contents

Receiver #

The thanos receive command implements the Prometheus Remote Write API. It builds on top of existing Prometheus TSDB and retains its usefulness while extending its functionality with long-term-storage, horizontal scalability, and downsampling. Prometheus instances are configured to continuously write metrics to it, and then Thanos Receive uploads TSDB blocks to an object storage bucket every 2 hours by default. Thanos Receive exposes the StoreAPI so that Thanos Queriers can query received metrics in real-time.

We recommend this component to users who can only push into a Thanos due to air-gapped, or egress only environments. Please note the various pros and cons of pushing metrics.

Thanos Receive supports multi-tenancy by using labels. See Multitenancy documentation here.

Thanos Receive supports ingesting exemplars via remote-write. By default, the exemplars are silently discarded as --tsdb.max-exemplars is set to 0. To enable exemplars storage, set the --tsdb.max-exemplars flag to a non-zero value. It exposes the ExemplarsAPI so that the Thanos Queriers can query the stored exemplars. Take a look at the documentation for exemplars storage in Prometheus to know more about it.

For more information please check out initial design proposal. For further information on tuning Prometheus Remote Write see remote write tuning document.

NOTE: As the block producer it’s important to set correct “external labels” that will identify data block across Thanos clusters. See external labels docs for details.

Example #

thanos receive \
    --tsdb.path "/path/to/receive/data/dir" \
    --grpc-address 0.0.0.0:10907 \
    --http-address 0.0.0.0:10909 \
    --receive.replication-factor 1 \
    --label "receive_replica=\"0\"" \
    --label "receive_cluster=\"eu1\"" \
    --receive.local-endpoint 127.0.0.1:10907 \
    --receive.hashrings-file ./data/hashring.json \
    --remote-write.address 0.0.0.0:10908 \
    --objstore.config-file "bucket.yml"

The example of remote_write Prometheus configuration:

remote_write:
- url: http://<thanos-receive-container-ip>:10908/api/v1/receive

where <thanos-receive-containter-ip> is an IP address reachable by Prometheus Server.

The example content of bucket.yml:

type: GCS
config:
  bucket: ""
  service_account: ""

The example content of hashring.json:

[
    {
        "endpoints": [
            "127.0.0.1:10907",
            "127.0.0.1:11907",
            "127.0.0.1:12907"
        ]
    }
]

With such configuration any receive listens for remote write on <ip>10908/api/v1/receive and will forward to correct one in hashring if needed for tenancy and replication.

Flags #

usage: thanos receive [<flags>]

Accept Prometheus remote write API requests and write to local tsdb.

Flags:
      --grpc-address="0.0.0.0:10901"
                                 Listen ip:port address for gRPC endpoints
                                 (StoreAPI). Make sure this address is routable
                                 from other components.
      --grpc-grace-period=2m     Time to wait after an interrupt received for
                                 GRPC Server.
      --grpc-server-max-connection-age=60m
                                 The grpc server max connection age. This
                                 controls how often to re-read the tls
                                 certificates and redo the TLS handshake
      --grpc-server-tls-cert=""  TLS Certificate for gRPC server, leave blank to
                                 disable TLS
      --grpc-server-tls-client-ca=""
                                 TLS CA to verify clients against. If no client
                                 CA is specified, there is no client
                                 verification on server side. (tls.NoClientCert)
      --grpc-server-tls-key=""   TLS Key for the gRPC server, leave blank to
                                 disable TLS
      --hash-func=               Specify which hash function to use when
                                 calculating the hashes of produced files. If no
                                 function has been specified, it does not
                                 happen. This permits avoiding downloading some
                                 files twice albeit at some performance cost.
                                 Possible values are: "", "SHA256".
  -h, --help                     Show context-sensitive help (also try
                                 --help-long and --help-man).
      --http-address="0.0.0.0:10902"
                                 Listen host:port for HTTP endpoints.
      --http-grace-period=2m     Time to wait after an interrupt received for
                                 HTTP Server.
      --http.config=""           [EXPERIMENTAL] Path to the configuration file
                                 that can enable TLS or authentication for all
                                 HTTP endpoints.
      --label=key="value" ...    External labels to announce. This flag will be
                                 removed in the future when handling multiple
                                 tsdb instances is added.
      --log.format=logfmt        Log format to use. Possible options: logfmt or
                                 json.
      --log.level=info           Log filtering level.
      --objstore.config=<content>
                                 Alternative to 'objstore.config-file' flag
                                 (mutually exclusive). Content of YAML file that
                                 contains object store configuration. See format
                                 details:
                                 https://thanos.io/tip/thanos/storage.md/#configuration
      --objstore.config-file=<file-path>
                                 Path to YAML file that contains object store
                                 configuration. See format details:
                                 https://thanos.io/tip/thanos/storage.md/#configuration
      --receive.default-tenant-id="default-tenant"
                                 Default tenant ID to use when none is provided
                                 via a header.
      --receive.hashrings=<content>
                                 Alternative to 'receive.hashrings-file' flag
                                 (lower priority). Content of file that contains
                                 the hashring configuration.
      --receive.hashrings-file=<path>
                                 Path to file that contains the hashring
                                 configuration. A watcher is initialized to
                                 watch changes and update the hashring
                                 dynamically.
      --receive.hashrings-file-refresh-interval=5m
                                 Refresh interval to re-read the hashring
                                 configuration file. (used as a fallback)
      --receive.local-endpoint=RECEIVE.LOCAL-ENDPOINT
                                 Endpoint of local receive node. Used to
                                 identify the local node in the hashring
                                 configuration.
      --receive.replica-header="THANOS-REPLICA"
                                 HTTP header specifying the replica number of a
                                 write request.
      --receive.replication-factor=1
                                 How many times to replicate incoming write
                                 requests.
      --receive.tenant-header="THANOS-TENANT"
                                 HTTP header to determine tenant for write
                                 requests.
      --receive.tenant-label-name="tenant_id"
                                 Label name through which the tenant will be
                                 announced.
      --remote-write.address="0.0.0.0:19291"
                                 Address to listen on for remote write requests.
      --remote-write.client-server-name=""
                                 Server name to verify the hostname on the
                                 returned TLS certificates. See
                                 https://tools.ietf.org/html/rfc4366#section-3.1
      --remote-write.client-tls-ca=""
                                 TLS CA Certificates to use to verify servers.
      --remote-write.client-tls-cert=""
                                 TLS Certificates to use to identify this client
                                 to the server.
      --remote-write.client-tls-key=""
                                 TLS Key for the client's certificate.
      --remote-write.server-tls-cert=""
                                 TLS Certificate for HTTP server, leave blank to
                                 disable TLS.
      --remote-write.server-tls-client-ca=""
                                 TLS CA to verify clients against. If no client
                                 CA is specified, there is no client
                                 verification on server side. (tls.NoClientCert)
      --remote-write.server-tls-key=""
                                 TLS Key for the HTTP server, leave blank to
                                 disable TLS.
      --request.logging-config=<content>
                                 Alternative to 'request.logging-config-file'
                                 flag (mutually exclusive). Content of YAML file
                                 with request logging configuration. See format
                                 details:
                                 https://thanos.io/tip/thanos/logging.md/#configuration
      --request.logging-config-file=<file-path>
                                 Path to YAML file with request logging
                                 configuration. See format details:
                                 https://thanos.io/tip/thanos/logging.md/#configuration
      --tracing.config=<content>
                                 Alternative to 'tracing.config-file' flag
                                 (mutually exclusive). Content of YAML file with
                                 tracing configuration. See format details:
                                 https://thanos.io/tip/thanos/tracing.md/#configuration
      --tracing.config-file=<file-path>
                                 Path to YAML file with tracing configuration.
                                 See format details:
                                 https://thanos.io/tip/thanos/tracing.md/#configuration
      --tsdb.allow-overlapping-blocks
                                 Allow overlapping blocks, which in turn enables
                                 vertical compaction and vertical query merge.
      --tsdb.max-exemplars=0     Enables support for ingesting exemplars and
                                 sets the maximum number of exemplars that will
                                 be stored per tenant. In case the exemplar
                                 storage becomes full (number of stored
                                 exemplars becomes equal to max-exemplars),
                                 ingesting a new exemplar will evict the oldest
                                 exemplar from storage. 0 (or less) value of
                                 this flag disables exemplars storage.
      --tsdb.no-lockfile         Do not create lockfile in TSDB data directory.
                                 In any case, the lockfiles will be deleted on
                                 next startup.
      --tsdb.path="./data"       Data directory of TSDB.
      --tsdb.retention=15d       How long to retain raw samples on local
                                 storage. 0d - disables this retention.
      --tsdb.wal-compression     Compress the tsdb WAL.
      --version                  Show application version.

Found a typo, inconsistency or missing information in our docs? Help us to improve Thanos documentation by proposing a fix on GitHub here ❤️