The thanos receive
command implements the Prometheus Remote Write API. It builds on top of existing Prometheus TSDB and retains their usefulness while extending their functionality with long-term-storage, horizontal scalability, and downsampling. It exposes the StoreAPI so that Thanos Queriers can query received metrics in real-time. The Thanos Sidecar is not sufficient for this, as the system would always lag the block length behind (typically 2 hours).
We recommend this component to users who can only push into a Thanos due to air-gapped, or egress only environments. Please note the various pros and cons of pushing metrics.
Thanos Receive supports multi-tenancy by using labels. See Multitenancy documentation here.
For more information please check out initial design proposal. For further information on tuning Prometheus Remote Write see remote write tuning document.
NOTE: As the block producer it’s important to set correct “external labels” that will identify data block across Thanos clusters. See external labels docs for details.
thanos receive \
--tsdb.path "/path/to/receive/data/dir" \
--grpc-address 0.0.0.0:10907 \
--http-address 0.0.0.0:10909 \
--receive.replication-factor 1 \
--label "receive_replica=\"0\"" \
--label "receive_cluster=\"eu1\"" \
--receive.local-endpoint 127.0.0.1:10907 \
--receive.hashrings-file ./data/hashring.json \
--remote-write.address 0.0.0.0:10908 \
--objstore.config-file "bucket.yml"
The example of remote_write
Prometheus configuration:
remote_write:
- url: http://<thanos-receive-container-ip>:10908/api/v1/receive
where <thanos-receive-containter-ip>
is an IP address reachable by Prometheus Server.
The example content of bucket.yml
:
type: GCS
config:
bucket: example-bucket
The example content of hashring.json
:
[
{
"endpoints": [
"127.0.0.1:10907",
"127.0.0.1:11907",
"127.0.0.1:12907"
]
}
]
With such configuration any receive is listens for remote write on <ip>10908/api/v1/receive
and will forward to correct one in hashring if needed for tenancy and replication.
usage: thanos receive [<flags>]
Accept Prometheus remote write API requests and write to local tsdb.
Flags:
--grpc-address="0.0.0.0:10901"
Listen ip:port address for gRPC endpoints
(StoreAPI). Make sure this address is routable
from other components.
--grpc-grace-period=2m Time to wait after an interrupt received for
GRPC Server.
--grpc-server-tls-cert="" TLS Certificate for gRPC server, leave blank to
disable TLS
--grpc-server-tls-client-ca=""
TLS CA to verify clients against. If no client
CA is specified, there is no client
verification on server side. (tls.NoClientCert)
--grpc-server-tls-key="" TLS Key for the gRPC server, leave blank to
disable TLS
--hash-func= Specify which hash function to use when
calculating the hashes of produced files. If no
function has been specified, it does not
happen. This permits avoiding downloading some
files twice albeit at some performance cost.
Possible values are: "", "SHA256".
-h, --help Show context-sensitive help (also try
--help-long and --help-man).
--http-address="0.0.0.0:10902"
Listen host:port for HTTP endpoints.
--http-grace-period=2m Time to wait after an interrupt received for
HTTP Server.
--label=key="value" ... External labels to announce. This flag will be
removed in the future when handling multiple
tsdb instances is added.
--log.format=logfmt Log format to use. Possible options: logfmt or
json.
--log.level=info Log filtering level.
--objstore.config=<content>
Alternative to 'objstore.config-file' flag
(mutually exclusive). Content of YAML file that
contains object store configuration. See format
details:
https://thanos.io/tip/thanos/storage.md/#configuration
--objstore.config-file=<file-path>
Path to YAML file that contains object store
configuration. See format details:
https://thanos.io/tip/thanos/storage.md/#configuration
--receive.default-tenant-id="default-tenant"
Default tenant ID to use when none is provided
via a header.
--receive.hashrings=<content>
Alternative to 'receive.hashrings-file' flag
(lower priority). Content of file that contains
the hashring configuration.
--receive.hashrings-file=<path>
Path to file that contains the hashring
configuration. A watcher is initialized to
watch changes and update the hashring
dynamically.
--receive.hashrings-file-refresh-interval=5m
Refresh interval to re-read the hashring
configuration file. (used as a fallback)
--receive.local-endpoint=RECEIVE.LOCAL-ENDPOINT
Endpoint of local receive node. Used to
identify the local node in the hashring
configuration.
--receive.replica-header="THANOS-REPLICA"
HTTP header specifying the replica number of a
write request.
--receive.replication-factor=1
How many times to replicate incoming write
requests.
--receive.tenant-header="THANOS-TENANT"
HTTP header to determine tenant for write
requests.
--receive.tenant-label-name="tenant_id"
Label name through which the tenant will be
announced.
--remote-write.address="0.0.0.0:19291"
Address to listen on for remote write requests.
--remote-write.client-server-name=""
Server name to verify the hostname on the
returned TLS certificates. See
https://tools.ietf.org/html/rfc4366#section-3.1
--remote-write.client-tls-ca=""
TLS CA Certificates to use to verify servers.
--remote-write.client-tls-cert=""
TLS Certificates to use to identify this client
to the server.
--remote-write.client-tls-key=""
TLS Key for the client's certificate.
--remote-write.server-tls-cert=""
TLS Certificate for HTTP server, leave blank to
disable TLS.
--remote-write.server-tls-client-ca=""
TLS CA to verify clients against. If no client
CA is specified, there is no client
verification on server side. (tls.NoClientCert)
--remote-write.server-tls-key=""
TLS Key for the HTTP server, leave blank to
disable TLS.
--request.logging-config=<content>
Alternative to 'request.logging-config-file'
flag (mutually exclusive). Content of YAML file
with request logging configuration. See format
details:
https://gist.github.com/yashrsharma44/02f5765c5710dd09ce5d14e854f22825
--request.logging-config-file=<file-path>
Path to YAML file with request logging
configuration. See format details:
https://gist.github.com/yashrsharma44/02f5765c5710dd09ce5d14e854f22825
--tracing.config=<content>
Alternative to 'tracing.config-file' flag
(mutually exclusive). Content of YAML file with
tracing configuration. See format details:
https://thanos.io/tip/thanos/tracing.md/#configuration
--tracing.config-file=<file-path>
Path to YAML file with tracing configuration.
See format details:
https://thanos.io/tip/thanos/tracing.md/#configuration
--tsdb.allow-overlapping-blocks
Allow overlapping blocks, which in turn enables
vertical compaction and vertical query merge.
--tsdb.no-lockfile Do not create lockfile in TSDB data directory.
In any case, the lockfiles will be deleted on
next startup.
--tsdb.path="./data" Data directory of TSDB.
--tsdb.retention=15d How long to retain raw samples on local
storage. 0d - disables this retention.
--tsdb.wal-compression Compress the tsdb WAL.
--version Show application version.